Have a sewer line problem?Request a callback
Colorado Springs, Colorado · Residential Sewer Lines
A sewer repair worker beside a compact excavator in a Colorado Springs front yard
Colorado Springs Sewer Pros

Sewer Line Repair Colorado Springs CO

When a basement drain backs up or the same clog keeps coming back in Colorado Springs or Pueblo, the first step is finding out where the line is failing. A sewer camera can show roots, a shifted joint, or a section of pipe that has dropped and is holding water.

If the line is still full, it may need to be cleared before the camera can get a good look. Ask for the footage and have the damaged spot marked above ground.

One bad joint can often be repaired on its own if the pipe on either side is sound. If the line has collapsed or has several failing sections, ask which stretch actually needs replacing.

Before you approve work, find out where the crew will need access and what they’ll put back when the job is done. That matters when the line runs under a driveway or a finished yard.

Sewer camera inspectionSpot repair and replacementTrenchless options where suitable
Sewer Line Repair ✦ Drain Cleaning ✦ Camera Inspection ✦ Sewer Replacement ✦ Trenchless Repair ✦ Root Removal ✦ Backups & Blockages ✦
Warning signs

Is the main sewer line
causing the backup?

A single slow sink may have a clog close to the fixture. If a toilet bubbles when the washer drains or water comes up through the basement floor drain, the problem may be farther down a shared drain. Note which fixture reacted first and whether the issue returns after clearing.

Common warning signs01 — 05
01

Several drains back up together

A basement drain, toilet, or tub may be the first low point where a main-line restriction becomes visible. If several fixtures react together, stop running water and note which one backed up first. That pattern can help distinguish a shared sewer restriction from a clog in one branch.

02

Toilets gurgle or bubble

Air moving through the plumbing can point to a blockage, vent issue, or trouble farther down the line. Pay attention to which fixture gurgles and whether another drain is slow at the same time. Gurgling is a clue, not a diagnosis, so recurring symptoms deserve a closer look.

03

The clog keeps coming back

Roots, buildup, a low spot, or a damaged section can bring the same blockage back after clearing. Note how soon the clog returns and whether multiple fixtures are affected. If it keeps recurring, a camera inspection can help show whether the issue is debris alone or a condition in the pipe.

04

A sewer odor won’t go away

Odor can come from a dry trap or vent, but a damaged pipe or failed connection may also need attention. Check whether the smell is limited to one fixture or appears in several rooms or outside. A persistent odor that returns after a trap is refilled should be evaluated rather than masked.

05

One patch of yard stays wet

A soggy or unusually green strip along the sewer route can signal leakage below the surface, though irrigation, runoff, and groundwater can look similar. Compare the area after dry weather and note any odor, slow drains, or unusual water use. Locate the suspected system before digging or choosing a repair.

One symptom can have more than one cause.Explore inspection and repair options →
Inspection, repair & replacement

Sewer Line Repair and Replacement
Options

A sewer line can back up because of roots, buildup, a shifted joint, a low spot, or a break. Clearing restores flow when there is a blockage. A camera inspection helps determine whether the pipe itself needs work and how much of it is affected.

01 / FIND IT

Inspect & clear

Main-line clearing can restore flow, while a camera inspection can show what remains inside the pipe. Together, those steps help distinguish a simple obstruction from roots, damage, or a low section that could cause another backup. The findings guide what to do after the line is open.

CAMERA INSPECTION · DRAIN CLEARING · HYDRO JETTING
02 / FIX IT

Sewer line spot repair

A spot repair can make sense for a broken joint or short damaged stretch when the rest of the pipe is sound. Ask where the defect sits, how deep it is, and what will need to be opened or restored to reach it.

SPOT REPAIR · ROOT REMOVAL · CLEANOUTS
03 / RENEW IT

Sewer line replacement

Multiple failures, extensive deterioration, or a collapsed stretch can call for partial or full replacement. Ask how much pipe the estimate covers, where the new line connects, and whether the proposed work addresses any slope or standing-water problems.

PIPE LINING · PIPE BURSTING · EXCAVATION
Can the line be fixed without trenching the whole yard?Trenchless sewer repair

Pipe lining installs a new interior inside a pipe that can be cleaned and has a usable route. Pipe bursting pulls a replacement pipe through the old route and typically needs access pits. Excavation may be needed to correct slope, reach a severe offset, or work around a collapse. Compare the access and surface restoration each option requires.

Colorado Springs pricing guide

How Much Does Sewer Line Repair Cost in Colorado Springs?

A camera visit or main-line clearing is usually a different budget from digging up a broken pipe. Published Colorado Springs contractor estimates place focused repairs in the thousands, with one excavator listing full replacement at $6,000–$12,000 or more. Use the figures below to plan the conversation, then get a written price for the located defect.

Published local budgeting ranges · reviewed November 2026
ServiceBudget rangeCheck the scope
Camera inspection$150–$700Access, recording, cleaning, and surface locating vary by scope
Main line clearing$200–$600Through an accessible cleanout; structural repair is separate
Main line hydro jetting$400–$1,000Cleaning scope and pipe suitability must be confirmed
Spot sewer repair$1,500–$6,500Published examples for a limited section; depth and access matter
Full lateral replacement$6,000–$12,000+One local excavator’s published range; not a maximum price

What does sewer work cost per foot?

One Colorado Springs excavator publishes $150–$250 per linear foot for replacement. A separate local plumbing page lists $95–$250 per foot for cured-in-place lining. They describe different scopes, so neither figure is a direct method-for-method comparison.

At $150–$250 per foot, 50 feet calculates to $7,500–$12,500. That is arithmetic using a published rate, not a quote for a 50-foot job. Ask whether pits, connections, permits, and surface repairs are already in the unit price.

What can move the estimate?

  • Access and depth: a pipe under an open yard differs from a deep run beneath concrete or beside a retaining wall.
  • Actual ground: rock removal, bedding, backfill, and compaction should be priced for the property, not assumed from the town name.
  • Work at either end: identify the cleanout, house connection, and main tap included in the quote.
  • Restoration and approval: list pavement, irrigation, landscaping, permit handling, and final inspection.
Pricing sources and what these ranges mean

Source review: November 20, 2026. These are third-party published estimates, not Colorado Springs Sewer Pros prices, completed-job averages, or a binding offer. Low and high figures may come from different scopes. Discounts, difficult access, emergency work, and restoration can fall outside them.

Inspection before scope

Know what failed
before you replace it.

A camera inspection helps separate a blockage from roots, a break, an offset, or a collapsed section. Those findings shape the repair choices and help explain where excavation or restoration may be needed. The footage is most useful when the affected area can also be located from the surface, so the estimate can describe a specific section instead of a guess.

01Locate the issueFind the affected stretch and access points.
02Review the conditionSee what the footage shows inside the pipe.
03Compare the scopeChoose a method that fits the actual failure.
What to bring to an estimate →
SEWER PIPE WORKILLUSTRATIVE IMAGE
Illustration of excavation beside a Colorado Springs home
Pipe work follows the inspection findings and repair scope.
Project planning

From the first inspection
to finished repair.

Clear expectations begin before the equipment comes out. A careful evaluation should explain what will be inspected, what findings support the recommendation, and what the estimate includes. Ask about access, utility marking, restoration, and how the result will be checked before work begins.

01
START WITH THE SYMPTOMS

Document what happens.

Which fixtures are affected, and does the problem appear after laundry or heavy water use? Note whether the clog has returned and how long it stayed clear after the last service. A short symptom history can help the provider choose an appropriate access point and inspection method.

→
02
INSPECT THE LINE

Find where the issue starts.

Camera footage can show roots, buildup, cracks, offsets, or a collapsed section when the line is clear enough to inspect. Access and surface locating help connect what appears on screen with the route outside. Ask for the distance from the access point and where that spot is above ground.

→
03
AGREE ON THE SCOPE

Match the work to the findings.

Depending on the findings, the next step may be clearing, a focused repair, trenchless work, or replacement. Each option has different access and restoration requirements, so compare them against the same documented pipe condition. A written scope should state what is included and what remains outside the work.

→
CAMERA FINDINGSREPAIR OPTIONSWORK THAT FITS THE PIPE
Planning a sewer repair

What affects sewer line
repair cost?

Colorado Springs & surrounding communities
Colorado Springs, CO

Who is responsible for the sewer line?

Public main and private service line

Colorado Springs Utilities distinguishes the public sewer main from the private wastewater service line that connects a property to it. Under city code, the property owner is responsible for maintaining that private line through its connection to the collection main.

Permits for repairs

A permit from Utilities is required before the service line is repaired or altered.

Utilities, backups & permits

Backed-up drains? Check the utility side too.

Colorado Springs Utilities asks its customers to report wastewater backups, private service breaks, and sewage odors at 719-448-4800 so it can determine whether the main or private service is involved. This is the utility’s contact, not this website’s estimate line. For another town, use its local provider guidance.

Colorado Springs Utilities service-line guidance

Homeowner FAQs

Colorado Springs
Sewer Line FAQs

What to check when a backup keeps coming back, what a camera can show, and what to ask before you approve work.

What should I do if sewage is coming up through my basement drain?

Stop flushing and running sinks, showers, and appliances that drain into the sewer. Keep people and pets away from the affected area. If several properties are affected or you suspect a public-main blockage, contact Colorado Springs Utilities.

Will a sewer camera inspection tell me why the line keeps clogging?

A clear view can show roots, breaks, shifted joints, and standing water. If sewage or debris obscures the pipe, the line may need clearing first. Ask for a copy of the video and the distance from the cleanout to any defect.

Can just one section of a sewer line be replaced?

Yes, if the damage is localized and the adjoining pipe is sound. A longer replacement may make more sense when the inspection shows multiple breaks, extensive deterioration, or a problem with the slope.

Can trenchless sewer repair work under a driveway?

It can in some cases. Ask where the entry and exit access points would go and whether the pipe is open enough for the proposed method. A collapse, severe offset, or slope correction may require digging at the damaged section.

Will cutting out tree roots fix a sewer line?

Root cutting can restore flow. If roots entered through an open joint or crack, they can grow back. Camera footage can help identify the opening and show whether a spot repair, lining, or replacement is worth comparing.

How much does sewer line replacement cost in Colorado Springs?

Published Colorado Springs estimates put main-line clearing at $200–$600 and a focused repair at $1,500–$6,500. One local excavator lists full replacement at $6,000–$12,000 or more. These are third-party budgeting figures; see the cost table and source notes for scope differences.

Do I need a permit to repair a sewer service line in Colorado Springs?

The Colorado Springs wastewater code requires a Utilities permit before repairing or altering the service line. Ask the contractor who will obtain the permit, coordinate inspection, and handle restoration if work reaches the public right-of-way.

Sewer line repair estimate

Tell us what’s happening
at your property.

Start with the affected fixtures, when the trouble began, and any previous camera or clearing work. If you already have inspection footage, keep a copy handy so the contractor can review the exact location and condition of the line.

START A CONVERSATIONFields marked * are required

Thank you!

Your request has been sent. We’ll follow up using the phone number you provided.

Need to speak with someone? Call 719-315-7400.